Unitech hard reset
Unitech HT660 hard reset
Before
you buy a new cell phone or new tablet, please try the following
procedure to repair your device. First charge your battery, backup your
important data if possible and in most cases take out SIM and SD card.
It is impossible to recover your data after doing a hard reset, so
online backup is always important. For all of your data, a backup should
be done on an external device, hard drive, raid system or media.
Unitech HT660 Warm Boot
Warm Boot is a reset to re-boot the HT660 without losing saved data. Perform a warm boot when:The terminal fails to respond
After installing some software applications
After making changes to certain system settings, such as network cards
WARNING - Performing a Warm Boot will result in the loss of all unsaved data!
Warm Boot via Software
To perform a Warm Boot via software, locate the file Windows/Boot.exe.
Tap “Warm Boot”. The system will be warm started.
Warm Boot via Hardware
Use a blunt pin (like an unfolded paper clip) to press the reset pin located on the front of the HT660, below the keypad.
HT660 Cold Boot
A Cold Boot is used to reset the operating system, restore the terminal back to factory default, and reset the terminal after a bootloader, keyboard, or kernel upgrade.
WARNING - Performing a Cold Boot will return the HT660 to its original factory settings!
Cold Boot via Software
To perform a Cold Boot via software, locate the file Windows/Boot.exe.
Tap “Cold Boot”. The system will be re-started and reset back to factory default.
You will need to recalibrate the screen and reset the date and time.
Cold Boot via Hardware
1. Remove the Main Battery
2. Switch OFF the Backup Battery
3. Switch the Backup Battery back ON
4. Insert the Main Battery
5. The terminal will be cold started and reset back to factory default
6. Recalibrate the screen and reset the date and time
