MiTAC Mio A702 hard reset
Before
you buy a new cell phone or new tablet, please try the following
procedure to repair your device. First charge your battery, backup your
important data if possible and in most cases take out SIM and SD card.
It is impossible to recover your data after doing a hard reset, so
online backup is always important. For all of your data, a backup should
be done on an external device, hard drive, raid system or media.
Mitac Mio A702 Soft reset
Use the stylus to press the reset button on the
device
In some cases, you may need to restore the device to the factory default state
by clearing the memory from the device. For example, you should clear the
memory:
- When the device does not respond after being reset.
- When you forget your password.
memory, including all files, system settings and additional programs you
have installed, will be erased. (Programs installed to ROM at the factory are
not affected.)
CAUTION: To ensure the integrity of your data should it be necessary to clear the
memory, you are advised to regularly back up your data.
Mitac Mio A702 hard reset
Follow this procedure to clear the memory from the device:1. Make sure that the device is turned off.
2. While pressing and holding the Power button, press and hold the Talk
button until the device vibrates.
3. The device will turn on automatically. The backlight of the keypad will
glow, and the setup wizard will appear on the screen. Follow the
on-screen instructions to complete the setup wizard.
4. Re-establish a partnership with your desktop computer.
5. Re-install the add-on software, if necessary.
